Basin bounce drains are meant to be placed in basin drains and other places to look great. According to the material, it can be divided into copper water, stainless steel water, plastic water and so on. Basin bouncing drainer is composed of upper and lower transparent leakage body, movable cover plate on the leakage body and a spring sheet (bouncing core) fixed vertically in the leakage body and with a button return device.

Therefore, when the basin bounces into the water, press the cover on the leaking body, and the spring bounces up the movable cover that supports the leaking body, so that the water leaks; when it is necessary to seal, press the cover of the leaking body and touch the spring that restores the key key. At this point it will be sealed. A bracket is provided at the lower end of the movable cover plate for the basin to bounce into the water, and the sealing ring is connected to the inner wall of the bracket and the leakage body, which is convenient for drainage and deodorization. Under normal circumstances, the dirt will stick to the basin and bounce off the water after a long time.

If it is not cleaned in time, it will definitely lead to the basin not leaking. It is necessary to loosen the drain in time and scrub the dirt on it with detergent to ensure that the drain is unobstructed. With the basin bouncing into the water, the water we use will have a place to go. What do you need to pay attention to when you choose a basin to bounce into the water? The following briefly introduces the precautions for purchasing a basin bounce drain:

1. It is recommended to use the basin with overflow hole to bounce into the water. The overflow hole means that when there is more and more water in the pool, there will be a diversion hole on the upper edge of the pool to drain the water. This hole is an overflow hole, and most new basins do not have overflow holes now. If the faucet is not turned off, the water will flow from the rim of the washbasin. The pool with overflow hole can avoid the overflow of water in the pool due to forgetting to a large extent.

2. Purchase the drain pipe. If the sewer is clogged, it's a hassle. No matter how good the method of clearing the sewer pipe, in order to prevent clogging, it is recommended to choose a deodorant box combination for the pool. This kind of launching is not only of good quality, but also easy to adjust the distance and height, easy to install and more convenient to use. All downpipes are copper, very durable and inexpensive.

3. When choosing the basin to bounce into the water, you can also look at the various accessories of the water launcher. Generally speaking, the fewer accessories, the simpler the installation. It is more convenient to replace privately. When you buy it, you can also do a drainage experiment to see how fast it drains and how well it seals with the downspout.

The handling skills of the basin bouncing into the water and blocking the water: see its assembly and ejector. First, use a pair of pliers to fasten the threaded rod to the locknut and loosen it. If the lock nut is loose, it will loosen slightly during assembly and rotation, and residual water will escape. Go back to the top of the sink, unscrew the pop, remove the front ring, pop out the bottom, and you're ready to install a new pop. If it is used for a long time, it may be caused by blockage. If it is not used for a long time, it may be that the bouncing stroke of the bouncing core in the bouncing device is not enough, resulting in insufficient bouncing height and slow drainage. It might be better to replace the bouncing heart.